COPYRIGHT© 2000 CANON INC. CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 2 OPERATIONS AND TIMING
2-35
3 Power Supply
3.1 Outline
The following figure shows an outline of the power supply system.
The machine is supplied with two channels of 24 V power (24 VP, 24 VL).
24 VP is mainly used by loads, and is cut off when the machine or its top cover is opened.
The circuit breaker (CB1) turns on in response to an overcurrent, thereby cutting off the
power to protect the circuit.
24 VL is first converted to 5 V by the regulator, and is used by logic elements and sensors.
The fuse resistor (R26) is designed to melt in response to an overcurrent in the circuit,
thereby cutting off the power to protect the circuit.
F02-301-01
Solenoid (SL1toSL3)
Upper cover
switch (MS2)
RF switch
(MS1)
J2-3
J2-4
J3-1
J3-2
COM
NO
COM
NO
Regulator
IC (Q14)
Circuit breaker
(CB1)
Host copier
24VP J2-1
J1-6
24VL
5V
Fuse resistor
(R26)
Logic
DADF controller PCB
Clutch (CL)
Brake (BK)
Motor (M1,M2,M3,M4)
Sensor (S1toS14)
Original width detecting
volume (VR)
Indicator LED
(LED101,102)
Recirulating motor (M4)
Summary of Contents for DADF-G1
