Canon D-50P, User Manual

Page: 108 / 113

EN-52
450
187
101*
373
Dimension drawings (unit: mm)
Specifi cations (continued)
Specifi cation of RGB signals in each computer
mode of the projector (continued)
Important:
• Some computers aren’t compatible with the
projector.
• The projector’s maximum resolution is 1024 x
768 pixels. It may not display images of higher
resolutions than 1024 x 768 correctly.
• Images with SYNC on G (Green) signal may jitter.
• Images with SYNC on G (Green) signal may be
tinged with green.
• If the resolution and frequency of your computer
aren’t shown on the table, fi nd the compatible
resolution and frequency by changing the resolution
of your computer.
• TV60 and TV50 are equivalent to 480i and 576i
respectively. When these signals are supplied to
the VIDEO IN or S-VIDEO IN terminal, the signal
mode is indicated as TV60 or TV50. When they are
supplied to the COMPUTER/COMPONENT VIDEO
IN terminals, the signal mode is indicated as 480i or
576i.
• This projector doesn’t support 480p signals from
video devices having 4 lines (R, G, B, CS*) or having 5
lines (R, G, B, H, V).
* : Composite Sync
468 450
187
101*
Without terminal cover
With terminal cover
Connectors
SERIAL (D-SUB 9-pin)
1 5
6 9
Pin No. Name I/O
1 – –
2 TXD IN
3 RXD OUT
4 – –
5 GND –
6 – –
7 – –
8 – –
9 – –
COMPUTER/COMPONENT VIDEO
IN-1 (Mini D-SUB 15-pin)
1 5
11
6 10
15
Pin No. Spec. Pin No. Spec.
1 R(RED)/P
R
/C
R
9 DDC 5V
2 G(GREEN)/Y 10 GND
3 B(BLUE)/P
B
/C
B
11 GND
4 GND 12 DDC Data
5 GND 13 HD/CS
6 GND 14 VD
7 GND 15 DDC Clock
8 GND
COMPUTER/COMPONENT VIDEO
DVI-D IN (HDCP) (DVI-D 24-pin)
17 24
16 9
8 1
Pin No. Spec. Pin No. Spec.
1 TMDS DATA 2- 13 -
2 TMDS DATA 2+ 14 +5V Power
3 TMDS DATA 2 Shield 15 Ground (for +5V)
4 - 16 Hot Plug Detect
5 - 17 TMDS DATA 0-
6 DDC Clock 18 TMDS DATA 0+
7 DDC Data 19 TMDS DATA 0 Shield
8 - 20 -
9 TMDS DATA 1- 21 -
10 TMDS DATA 1+ 22 TMDS Clock Shield
11 TMDS DATA 1 Shield 23 TMDS Clock+
12 - 24 TMDS Clock-
HDMI IN
(HDMI 19-pin)
19 1
2 18
Pin No. Spec. Pin No. Spec.
1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock-
3 TMDS Data2- 13 CEC
4 TMDS Data1+ 14 –
5 TMDS Data1 Shield 15 SCL
6 TMDS Data1- 16 SDA
7 TMDS Data0+ 17 DDC Ground
8 TMDS Data0 Shield 18 +5 V Power
9 TMDS Data0- 19 Hot Plug Detect
10 TMDS Clock+
*: Factory-defaults