manualshive.com logo in svg

Canon ColorPass-Z7400, Configuration Manual

The Canon ColorPass-Z7400 Configuration Manual is a comprehensive guide designed to assist users in proper setup and configuration of their device. This essential manual can be downloaded for free from manualshive.com, enabling users to conveniently access and optimize their product's performance.

Share
Download
background image

 

1

 

1-1

ColorPASS on the network

 

This chapter summarizes the stages in setting up the ColorPASS, and includes 
diagrams that refer you to other chapters or other manuals for completing your 
installation. Check those references to find the information you need quickly.

 

ColorPASS on the network

 

When the ColorPASS is connected to a network, it behaves as a networked PostScript 
printer. The built-in Ethernet interface on the ColorPASS supports the following 
network protocols:

• AppleTalk

• TCP/IP (the lpd, nbt, SMTP, SNMP, Port9100, IMAP, POP3, and http protocols)

TCP/IP stands for Transmission Control Protocol/Internet Protocol. The lpd 
protocol is the standard TCP/IP printing protocol. The nbt protocol supports 
Windows (SMB) printing. The SMTP (simple mail transfer protocol) is the 
protocol that sends e-mail between servers. The SNMP (simple network 
management protocol) manages complex networks. The port 9100 is the printer 
server port number to publish print connections between the print server and a 
remote computer. The IMAP (internet message access protocol) retrieves e-mail 
messages. The POP3 (post office protocol) retrieves e-mail messages with or without 
SMTP. The http (hypertext transfer protocol) is commonly used for Web pages on 
the Internet and on intranets. The http also supports IPP printing.

In addition, the DHCP and BOOTP are used for assigning IP addresses 
automatically. These are not shown in the diagrams in this chapter. For more 
information, see 

“TCP/IP Setup options”

 on page 4-19.

• IPX/SPX (Novell)

IPX/SPX stands for Internetwork Packet Exchange/Sequenced Packet Exchange. 

Chapter 1:
Connecting 
to the Network

Summary of Contents for ColorPass-Z7400



















































































































































































































Reviews:

No comments

Related manuals for ColorPass-Z7400

Lanner LEC-3010 User Manual preview
LEC-3010
Brand: Lanner Pages: 43
Xantech XMUSICWP User Manual preview
XMUSICWP
Brand: Xantech Pages: 52
Yeong Yang Cube YY-0430 Technical Instruction preview
Cube YY-0430
Brand: Yeong Yang Pages: 7
Devolinx STE-601C User Manual preview
STE-601C
Brand: Devolinx Pages: 51
IBM Eserver xSeries 360 Type 8686 Installation Manual preview
Eserver xSeries 360 Type 8686
Brand: IBM Pages: 74
IBM 87401RU Installation And User Manual preview
87401RU
Brand: IBM Pages: 110
NTI ENVIROMUX-MINI Installation And Operation Manual preview
ENVIROMUX-MINI
Brand: NTI Pages: 35
TerraMaster NAS U8-111 Quick Start Manual preview
NAS U8-111
Brand: TerraMaster Pages: 13
Patton SN4524 Setup Manual preview
SN4524
Brand: Patton Pages: 15
Cisco UCS C220 M4 Maintaining The Server preview
UCS C220 M4
Brand: Cisco Pages: 72
Cisco UCS C240 M3 User Manual preview
UCS C240 M3
Brand: Cisco Pages: 64
Cisco TelePresence MSE 8710 Installation Manual preview
TelePresence MSE 8710
Brand: Cisco Pages: 12
Cisco Secure Network Server 3600 Series Hardware Installation Manual preview
Secure Network Server 3600 Series
Brand: Cisco Pages: 38
Cisco UCS C220 M5 Maintaining preview
UCS C220 M5
Brand: Cisco Pages: 86
Cisco SFS 7008P Installation And Configuration Manual preview
SFS 7008P
Brand: Cisco Pages: 34
Cisco SNS-3415 series Installing Manual preview
SNS-3415 series
Brand: Cisco Pages: 18
Cisco UCS C240 M3 Specifications preview
UCS C240 M3
Brand: Cisco Pages: 90
Cisco UCS C460 M2 User Manual preview
UCS C460 M2
Brand: Cisco Pages: 56

Brands by name

Popular brands

Load more brands