manualshive.com logo in svg

Canon ColorPass-Z7400, Configuration Manual

The Canon ColorPass-Z7400 Configuration Manual is a comprehensive guide designed to assist users in proper setup and configuration of their device. This essential manual can be downloaded for free from manualshive.com, enabling users to conveniently access and optimize their product's performance.

Share
Download
background image

4

4-19

Network Setup options

Protocol Setup options

AppleTalk Zone

List of zones

The ColorPASS searches the network for AppleTalk zones in your network segment. 
Scroll through the list to select the AppleTalk zone in which you want the ColorPASS 
to appear. If your segment has only one zone, the ColorPASS is assigned to that 
zone

 

automatically.

The message “No AppleTalk zone found” may mean your network has no zones, or the 
network cable is not connected (see 

Appendix A

). Choose OK to dismiss the message.

TCP/IP Setup options

When you set an IP address, subnet mask, or gateway address for the ColorPASS 
during Setup, you can allow the ColorPASS to get these addresses automatically from a 
DHCP or BOOTP server. Turn on or restart the ColorPASS and allow it to reach 
Idle. Make sure the DHCP or BOOTP server is running, and then perform 
ColorPASS Setup.

To configure the ColorPASS, choose each protocol and enter the settings for that 
protocol. You can enable AppleTalk, TCP/IP, and IPX/SPX communication

 

simultaneously.

Network Setup

Protocol Setup

AppleTalk Setup

Enable AppleTalk
Yes/No [Yes]

Select Yes if you have an AppleTalk network connected to the ColorPASS. This 
setting enables the ColorPASS to communicate over AppleTalk networks.

To configure the ColorPASS for TCP/IP, choose TCP/IP Setup.

Choose Ethernet Setup and enter the appropriate settings. Choose each network 
type you use (Ethernet) and enter the appropriate settings. 

Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup

Protocol Setup

 

Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup

Protocol Setup

 

Summary of Contents for ColorPass-Z7400



















































































































































































































Reviews:

No comments

Related manuals for ColorPass-Z7400

Kaleidescape Terra Installation Manual preview
Terra
Brand: Kaleidescape Pages: 11
Sun Fire X4600 Installation Manual preview
X4600
Brand: Sun Fire Pages: 66
IBM Power 570 Technical Overview And Introduction preview
Power 570
Brand: IBM Pages: 142
LaCie 301300U - Ethernet Disk NAS Server User Manual preview
301300U - Ethernet Disk NAS Server
Brand: LaCie Pages: 62
Brother HL-3400CN Series User Manual preview
HL-3400CN Series
Brand: Brother Pages: 280
Brother HL-6050DN Service Manual preview
HL-6050DN
Brand: Brother Pages: 308
Brother 2200W - NC Print Server Network User'S Manual preview
2200W - NC Print Server
Brand: Brother Pages: 75
Brother HL-6050DW Network User'S Manual preview
HL-6050DW
Brand: Brother Pages: 148
Brother HL-3400CN Series Service Manual preview
HL-3400CN Series
Brand: Brother Pages: 8
BITMAIN S4+ Manual preview
S4+
Brand: BITMAIN Pages: 10
MATE iSense User Manual preview
iSense
Brand: MATE Pages: 68
AirLive WFP-101UV2 User Manual preview
WFP-101UV2
Brand: AirLive Pages: 106
IBM 787264U Product Manual preview
787264U
Brand: IBM Pages: 21
Intel TIGPT1U - Carrier Grade Server Specification preview
TIGPT1U - Carrier Grade Server
Brand: Intel Pages: 89
SMC Networks FieldServer FS-8700-10 Driver Manual preview
FieldServer FS-8700-10
Brand: SMC Networks Pages: 10
OSS EOS-2U-4A User Manual preview
EOS-2U-4A
Brand: OSS Pages: 54
Gateway 960 User Manual preview
960
Brand: Gateway Pages: 157
Gigabyte R283-S91-AAE1 User Manual preview
R283-S91-AAE1
Brand: Gigabyte Pages: 123

Brands by name

Popular brands

Load more brands