manualshive.com logo in svg

Canon ColorPASS-Z5000, Color Manual

Share
Download
Canon ColorPASS-Z5000 Color Manual Download Page 83

3

3-25

Calibrating with ColorWise Pro Tools and DTP41

T

O

 

CONNECT

 

THE

 X-R

ITE

 DTP32 

TO

 

THE

 

COMPUTER

:

1.

Turn off the computer.

2.

Plug the square end of the interface cable (looks like a modular phone plug) into the 
I/O port on the side of the X-Rite DTP32.

3.

Attach the connector to the computer.

For a Windows computer, insert the 8-pin mini-DIN end of the interface cable into 
the 9-pin DB9 Connector cable adapter. Insert the 9-pin end into the COM1 or 
COM2 port on the computer and tighten the screws. If the available port on your 
computer is 25-pin, you must use the 8-pin-to-25-pin adapter.

Square connector

Square connector

Unused connector

Connect to computer

Interface cable

Connect to adapter

Summary of Contents for ColorPASS-Z5000























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands