4
4) Push the lock lever [1] to remove the boot ROM
[2].
F-1-5
5) Fit the included boot ROM [1] in place.
F-1-6
6) Connect the cables and put back the cover discon-
nected and removed in steps 2) and 3), respectively.
7) Turn on the main power switch.
8) When a message has appeared prompting you to
turn off and then on the power, perform the shut-
down sequence to turn off the main power switch,
and then turn it back on.
3. Checking the Connection
Go through the following to make sure the machine
correctly recognizes the presence of the boot ROM:
1) Check the Check Counter key [1] on the control
panel.
F-1-7
2) Press the Check Device Configuration key [1].
F-1-8
3) Check to see that'UFR II Printer KIt-L1' are indicat-
ed as accessories.
1.2.2 Installing the Soft-
ware
1. Network Setting
MEMO:
Check that the network setting of the host machine is
completed.
[1]
[2]
[1]
1 2 3
1
2
3
4
5
6
7
8
9
0
[1]
[1]
