3
1.2 Installation procedure
1.2.1 Installation
1. Turning Off the iR Machine
Turning Off the Main Power
To protect the hard disk against damage, be sure to go
through the following steps in sequence when turning
off the main power:
1. Hold down the control panel power switch for 3 sec
or more.
2. Follow the instructions for the shut-down sequence
shown on the screen so that the machine's main
power switch may be turned off.
3. Turn off the main power switch.
4. Disconnect the power cable (from the power out-
let).
2. Installation Procedure
1) Disconnect the connector and the cable.
- reader communications cable connector [1] (2 lo-
cations)
- DADF cable [2] (1 location)
F-1-2
2) Remove the rear right cover.
- 7 screws [1].
F-1-3
3) Remove the controller box cover [2].
- 16 screws [1]
F-1-4
[1]
[2]
[2]
[2]
[1]
[2]
[2]
[2]
[1]
[2]
