manualshive.com logo in svg

Canon Color imageRUNNER LBP5970, User Manual

Share
Download
Canon Color imageRUNNER LBP5970 User Manual Download Page 23

xx

 

Power Supply

WARNING

•

Do not damage or modify the power cord. Also, do not place heavy objects on the 
power cord, or pull on or excessively bend it, as this could cause electrical damage 
and result in a fire or electrical shock.

•

Keep the power cord away from a heat source; failure to do this may cause the power 
cord coating to melt, resulting in a fire or electrical shock.

•

Do not plug or unplug the power plug with wet hands, as this may result in electrical 
shock.

•

Do not plug the power cord to a multiplug power strip, as this may cause a fire or 
electrical shock.

•

Do not bundle up or tie the power cord in a knot, as this may result in a fire or 
electrical shock.

•

Insert the power plug completely into the AC power outlet, as failure to do so may 
result in a fire or electrical shock.

•

Do not use power cords other than the power cord provided, as this may result in a 
fire or electrical shock.

•

As a general rule, do not use extension cords or plug extension cords to a multiple 
power strip. If extension cords must be used or plugged to a multiple power strip, 
however, use them observing the following points on user's own authority. If you use 
extension cords improperly, this may result in a fire or electrical shock.

- Do not connect one extension cord to another.

- Make sure that the voltage of the power plug is the one indicated in the rating label 

(attached on the back of the printer) when you use the printer.

- Use an extension cord that allows the current value greater than the necessary one 

indicated in the rating label (attached on the back of the printer).

- When you use an extension cord, untie the cord binding, and insert the power plug 

completely into the extension cord outlet to ensure a firm connection between the 
power cord and the extension cord.

- Periodically check that the extension cord is not overheated.

CAUTION

•

 Do not use power supplies with voltages other than those specified herein, as this 
may result in a fire or electrical shock.

•

Always grasp the plug when unplugging the power cord. Pulling on the power cord 
may expose or snap the core wire, or otherwise damage the power cord. If the power 
cord is damaged, this could cause current to leak, resulting in a fire or electrical 
shock.

•

Leave sufficient space around the power plug so that it can be unplugged easily. If 
objects are placed around the power plug, you will be unable to unplug it in an 
emergency.

Summary of Contents for Color imageRUNNER LBP5970







































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands