manualshive.com logo in svg

Canon Color imageRUNNER LBP5360, User Manual, Page: 340 / 446

Share
Download
Canon Color imageRUNNER LBP5360 User Manual Download Page 340

8-41

T

roub

leshooting

8

Message List

Cause 2

The printer received secured print data when the hard disk cannot be used.

Remedy

Press the 

 (Online) key to cancel printing, set HARD DISK (See p. 6-19) in 

the CONTROL MENU options in the SETUP menu to ON, perform a hard reset, 
and then print again.

Cause 3

The number of the jobs exceeded the amount of jobs the printer can save as 
secured print jobs (You can save up to 64 secured print jobs in the hard disk.)

Remedy

Press the 

 (Online) key to cancel printing, delete any unnecessary secured 

print jobs, and then print again.

Cause 4

The amount of the job data exceeded the amount of job data that you can save 
on  the hard disk as secured print jobs (You can save the data in total of up to 
4GB of secured print jobs, stored jobs, and paused jobs in the hard disk. 
However, when SECURED TYPE in the CONTROL MENU options is set to 
PDL, you can save only up to 1.88GB of data.

Remedy

Press the 

 (Online) key to cancel printing, resume any paused jobs or delete 

unnecessary secured print jobs, and then print again.

<53 STORE ERROR>

<Auto Error Skip>

Cause 1

The data for which a stored job print is specified is sent from a printer driver that 
is not for LBP5360.

Remedy

Press the 

 (Online) key to cancel the job.

Cause 2

The data cannot be saved on the hard disk because there is not sufficient free 
space in the hard disk.

Remedy

The printer is ready to print by pressing the 

 (Online) key, ignoring the print 

data.

Cause 3

The number of the jobs exceeded the number of jobs you can save on the hard 
disk.

Remedy 1 The printer is ready to print by pressing the 

 (Online) key, ignoring the print 

data.

Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.

Cause 4

The amount of the print jobs exceeded the amount of jobs you can save on the 
hard disk.

Remedy 1 The printer is ready to print by pressing the 

 (Online) key, ignoring the print 

data.

Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.

Summary of Contents for Color imageRUNNER LBP5360































































































































































































































































































































































































































































Reviews:

No comments