manualshive.com logo in svg

Canon Color imageRUNNER LBP5360, User Manual, Page: 337 / 446

Share
Download
Canon Color imageRUNNER LBP5360 User Manual Download Page 337

8-38

T

roub

leshooting

8

Message List

Remedy 2 After turning the printer OFF, restore the memory to the original condition 

(install the removed RAM), and then print again. (See "Installing RAM," on p. 
9-15)

Remedy 3 Set EXT.RX BUFFER (See p. 6-51) in the INTERFACE MENU options in the 

SETUP menu to OFF, and then print again.

<32 2-SIDED ERROR>

<Auto Error Skip>

Cause

The printer received 2-sided printing data of paper sizes (including the 
orientation) or paper types unavailable for automatic 2-sided printing.

Remedy 1 The printer continues printing by pressing the 

 (Online) key. However, the 

data on each side is printed on two pages.

Remedy 2 After performing a soft reset in the RESET menu, change the setting to a paper 

size or type available for automatic 2-sided printing, and then print again.

<33 WORK MEM.FULL>

<Auto Error Skip>

Cause

The work memory for each operation mode cannot be secured.

Remedy 1 The printer continues printing by pressing the 

 (Online) key. However, the 

data with which an error has occurred is not printed properly.

IMPORTANT

When you continue printing by pressing the 

 (Online) key, be aware that the data of 

macro that is already registered may be deleted.

Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using 

the following procedure, and then print again.

•

Perform a hard reset or cycle the power of the printer (Be aware that all the 
data in the memory that the printer has received will be deleted).

•

If you are using UFR II Printer Driver, install an optional expansion RAM 
module. However, the problem may not be solved even after the expansion 
RAM module is installed. (See "Installing RAM," on p. 9-15)

<35 TABLE FULL>

<Auto Error Skip>

Cause

The number of the documents in a job has exceeded 16.

Remedy

The printer continues printing by pressing the 

 (Online) key. However, the 

job with which an error has occurred is not printed.

Summary of Contents for Color imageRUNNER LBP5360































































































































































































































































































































































































































































Reviews:

No comments