manualshive.com logo in svg

Canon Color Bubble Jet BJC-5000 Series, Service Manual

Share
Download
Canon Color Bubble Jet BJC-5000 Series Service Manual Download Page 89

4-17

BJC-5000

Part 4: Technical Reference

3.2  BJ Cartridge

3.2.1  Black BJ cartridge structure

The black BJ cartridge has a 128-nozzle printhead.  The printhead and ink cartridge
are assembled in a single cartridge body.

1)  Cartridge cover

A plastic cover is attached to the cartridge body to prevent ink from leaking inside
the cartridge.  
As the ink is consumed, the pressure inside the cartridge decreases relative to the
atmospheric pressure.  This makes it harder for the ink to be supplied to the head.
To prevent this, the cartridge cover is provided with a pressure adjusting hole for
maintaining constant pressure inside the cartridge body.

2)  Ink sponge

The sponge is soaked with black ink.  It is compressed and stored in the cartridge
body.

3)  Cartridge body

The plastic case connects the ink sponge with the bubble jet head unit via the ink
filter.

4)  Bubble jet head unit

Ink is discharged through 128 bubble jet nozzles in accordance with the print
signals received through the signal contact.

Figure 4-12  Black BJ Cartridge Structure

Pressure Adjusting Hole

Cartridge Cover

Ink Sponge

Label

Ink Filter

Cartridge Body

Joint Pipe

Aluminum Plate

Signal Contact

128 Bubble Jet Nozzles

Faceplate

Bubble Jet Head Unit

Summary of Contents for Color Bubble Jet BJC-5000 Series


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands