manualshive.com logo in svg

Canon Color Bubble Jet BJC-5000 Series, Service Manual

Share
Download
Canon Color Bubble Jet BJC-5000 Series Service Manual Download Page 15

1. SAFETY PRECAUTIONS

1.1  Moving Parts

Be careful not to get fingers, hair, clothing, or personal accessories caught in the
moving parts of the printer. There are several moving parts, driven by the carriage
motor and by the paper feed motor.

Moving parts driven by the carriage motor:

Carriage belt, idler pulley, and carriage.

Moving parts driven by the paper feed motor:

Feed roller, pressure rollers, spurs, pick-up roller, slow down gear, eject roller, and
transmission roller.
Also note that the spurs are made of metal and have sharp edges.  Do not touch the
spurs, especially with bare hands.  Serious injury could be caused by touching the
spurs unintentionally.  

Part 1:  Safety and Precautions

BJC-5000

1-1

Figure 1-1  Moving Parts of the Printer

Eject Roller

Feed Roller

Pressure Rollers

Paper Feed Motor

Slow Down Gear

Idler Pulley

Carriage

Carriage Belt

Carriage Motor

Pick-Up Roller

Transmission Roller

Spurs

Summary of Contents for Color Bubble Jet BJC-5000 Series


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands