Canon Color Bubble Jet BJC-5000 Series Service Manual Download Page 74

Page: 74 / 161

Part 4: Technical Reference

4-2

BJC-5000

1.2 Initialization Sequence Flowchart

The flowchart below shows the initialization process from when the printer is turned on
to when it goes online.

• The temperature sensor on the logic board

checks the machine temperature.

• Checks the waste ink counter in EEPROM.

Connect AC plug.

(Hardware power-on)

Software initialization

Press the POWER button.
(Softpower-on)

Paper feed

motor initialization

Cartridge detection

Automatic cleaning

operation

• Connect the AC plug to the AC outlet.

• MPU and printer controller initialization
• ROM/RAM/EEPROM check

• Turn on the printer.

• Drives the paper feed motor drives.
• Sets the pickup roller and paper lifting plate to the

initial position.

• When the automatic cleaning is not performed,

operates the maintenance jet.

Indicator lights

(green).

Purge unit

initialization

Carriage position

control

• Drives the carriage motor.
• Moves the carriage to the home position.

Indicator blinks

(green).

Temperature sensor

(TH1) check

• Drives the paper feed motor.
• Capping operation

Waste ink check

Figure 4-2 Initialization Sequence Flowchart

Summary of Contents for Color Bubble Jet BJC-5000 Series

































































































































































Search results

Summary of Contents for Color Bubble Jet BJC-5000 Series

Reviews:

Brands by name

Popular brands

Canon Color Bubble Jet BJC-5000 Series, Service Manual

Search results

Summary of Contents for Color Bubble Jet BJC-5000 Series

Reviews:

Brands by name

Popular brands