Canon Color Bubble Jet BJC-1000 Series, Service Manual

Page: 54 / 126

Part 3: Operating Instructions
BJC-1000
3-12
2.3.2 Service test print
On the service test print, the control ROM version, and EEPROM (IC8) data are
printed, as shown below.
The service test print is produced in the following procedure:
1. Without a cartridge installed, connect the plug of the AC adapter to the AC outlet
while holding down the RESUME button .
2. Release the
RESUME button
. Press it down again within five seconds and release it.
The carriage moves to the center, and stops.
3. Open the front cover and install the black BJ cartridge.
4. Close the front cover and press the
RESUME button twice. The printer starts the
service test printing.
ROM Ver X.XX BC-02 LostInk XX.X% PageCount-> BK XXXXX CL XXXXX LD XXXXX
Version Number of Control ROM
Color
Black
Total Waste Ink Amount (absorption ratio of the waste ink absorber: %)
Photo
Total Number of Pages Passed When Using Cartridge
Figure 3-14 Service Test Print