Canon CD-R Print Manual Download

Page: 18 / 20

The POWER Lamp Flashes Orange

When a printer error occurs, the POWER lamp flashes. The number of flashes indicates the type of error.

Count the flashes and take the appropriate action to correct the error.

This section deals with errors on the CD-R Tray only. For other errors, refer to the

User’s Guide

Printing Area

CD-R (12 cm/8 cm), DVD-R

CD-R (12 cm/8 cm), DVD-R, the printing area of the both
media is within the limits which are one millimeter away from
the internal and external diameters of the label.

Number of

flashes

Possible Cause

Try This

Two flashes

CD-R Tray not in
place

Ensure the following items, then press the

RESUME/

CANCEL

button:

- The CD-R Tray supplied with this printer (“B” is on the

upper side) is used.

- A CD-R/DVD-R is in place.
- The CD-R Tray is attached properly.

Seven flashes

CD-R or DVD-R not
set

Ensure that the CD-R or DVD-R is set on the CD-R Tray
correctly. Place the CD-R Tray again, and press the

RESUME/CANCEL

button.

1.0 mm

Summary of Contents for CD-R





















Search results

Summary of Contents for CD-R

Reviews:

Related manuals for CD-R

Brands by name

Popular brands

Canon CD-R, Print Manual

Search results

Summary of Contents for CD-R

Reviews:

Related manuals for CD-R

Brands by name

Popular brands