Canon C2050, Service Handbook

Page: 70 / 292

CHAPTER 2 STANDARDS AND ADJUSTMENTS
2-10P
3 Pickup/Feed System-Related Adjustments
3.1 Attaching the Timing Belt for the Manual Feed Tray Assem-
bly
Remove the timing belt from the manual feed tray assembly, and perform the following:
1) Adjust the slide guide to the maximum paper width, and check to make sure that the
rack [1] is as indicated.
2) Move the protrusion [2] of the manual feed paper width sensor (S46) in the direction
of the arrow until it stops.
3) Mount the timing belt and the parts as shown.
For the protrusion [2] of the manual feed paper width sensor (S46) and the
belt lock plate [2], be sure that there will be a gap in section A when the
slide guide is moved.
F02-301-01
4) Make the adjustments under “3.2 Executing Paper Width Reference Point Auto Adjust-
ment of the Manual Feed Tray.”
[1]
[2]
[1] [3]
A
A
[2] [3]