Canon C2050, Service Handbook

Page: 59 / 292

CHAPTER 1 MAINTENANCE AND INSPECTION
1-5P
7) Push the test button of the leakage breaker, and check to make sure that the open/close
lever shifts to the OFF side.
After the check, turn off the power switch, and shift the lever to the ON side; thereafter,
turn on the power switch.
If the lever fails to shift to the OFF side, replace the leakage breaker. Then, check the
operation of the breaker.
F01-300-01
8) Put the sample prints into order, and clean up the area around the machine.
9) Record the final counter reading.
10) Fill out the Service Book, and report to the person in charge.
Be sue to record the check on the leakage breaker in the history column of the Service
Book.
Test button
Open/close lever