background image

Canon

 

 Booklet Maker Service Support Guide 

COPYRIGHTS AND TRADEMARKS

 

This Service Guide is the property of Canon U.S.A., Inc.  

© Canon U.S.A., Inc. 2015. All rights reserved. 

Canon and Always Ask for Canon Genuine Toner, Parts & Supplies are registered trademarks of Canon 
Inc. 

Océ and VarioPrint, are registered trademarks of Océ-Technologies B.V. 

All other company names and product names may be trademarks or registered trademarks of their 
respective owners, and are hereby acknowledged. 

LEGAL NOTICES 

The information contained in this Service Support Guide constitutes confidential information of Canon 
U.S.A., Inc. 

Pursuant to the authorized Service Agreement with Canon U.S.A., Inc., this Service Support Guide is 
solely for reference purposes and may be used only by an authorized Service Provider of Canon U.S.A., 
Inc. No part of this Service Support Guide may be reproduced or transmitted in any form by any means, 
electronic or mechanical, for any purpose without the prior written consent of Canon U.S.A., Inc., except 
as expressly permitted herein. 

Pursuant to the authorized Service Agreement with Canon U.S.A., Inc., Service Provider agrees to 
indemnify Canon U.S.A., Inc. and to hold it harmless from and against any and  all claims arising out of 
Service Provider’s possession, use, or misuse of this Service Support Guide. 

Canon U.S.A., Inc. from time to time updates this online Service Support Guide and may modify the 
information and/or specifications contained in it at any time without notice. Additionally, all prices and 
availability dates listed herein are subject to change without notice. The latest version is available online 
at the ISG Central and e-Support  Web Sites noted above. Please make certain that you are using the 
latest version. Specimens of Web pages included herein are for illustration purposes only. 

DISCLAIMER

 

NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE 
LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND 
DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER), LOSS 
OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, 
EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF 
DATA, INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT’S HARD DISK 
DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES 
CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE 
LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR 
ANY AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES.  NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ITS SUPPLIERS OR 
ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE 
OF THE PRODUCT CAUSING THE ALLEGED DAMAGE.  WITHOUT LIMITING THE FOREGOING, 
THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO 
PERSONS AND THE PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT OF THE 
POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT NOT CAUSED SOLELY AND 
DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER.

 

 

 

 Booklet Maker Service Support Guide 

March 2015 

Revision 1 

Page ii 

Summary of Contents for BLM 550+































Reviews: