Canon
Booklet Maker Service Support Guide
B. Installation Weight and Dimensions
Table 11 – Approximate Weight
Component
Approximate Weight
Booklet Maker
1,549 lb
702 kg
Book Stacker
330 lb
150 kg
Watkiss P2T 2-Knife Trimmer
661 lb
300 kg
Table 12 – Dimensions
Unit
Height
Width
Depth
Booklet Maker
52.4” 1,330 mm
65.9” 1,675 mm
73.6” 1,870 mm
Book Stacker
40.6” 1,030 mm
49.2” 1,250 mm
53.1” 1,350 mm
Watkiss P2T 2-Knife Trimmer
38.1”
968 mm
45.0” 1,142 mm
36.4”
924 mm
C. Installation Space Requirements
The Booklet Maker approximate installation space requirements may
differ, depending on how the machine is configured and the optional modules
attached. Always ensure that there is enough space for service and operation
of the device. The Installation space for the Booklet Maker adds to
the VarioPrint 6000+ Series device installation space when configured with the
High Capacity Stacker.
IMPORTANT
•
In addition to the space required by the VarioPr Series the following
space requirements are necessary for the proper servicing of the equipment
(with all doors and access panels open).:
•
The Booklet Maker (including the connecting bridge) requires
approximately 87.8” x 112.6” (2,230 mm x 2,860 mm) of space
•
The Booklet Maker (including the connecting bridge),
connected with the Book Stacker requires approximately 91.3” x 129.5”
(2,320 mm x 3,290 mm) of space
•
The Booklet Maker (including the connecting bridge),
connected with the Book Stacker and Watkiss P2T 2-Knife Trimmer
requires approximately 107” x 153.5” (2,700 mm x 3,900 mm) of space
•
As indicated in Figure 1, for the proper servicing of the equipment (with all
doors and access panels open) make sure to keep the back of the
Booklet Maker at least 23.6” (600 mm) away from a wall and keep
the sides at least 21.7” (550 mm) away from a wall.
8
Includes the connecting bridge. The dimensions are when the Booklet Maker is assembled.
9
The height is adjustable from 34.8” (885 mm) to 38.1” (968 mm)
Booklet Maker Service Support Guide
March 2015
Revision 1
Page 9
