manualshive.com logo in svg

Canon BJC-4300 Series, User Manual, Page: 82 / 100

Share
Download
Canon BJC-4300 Series User Manual Download Page 82

Installing and Removing the Optional Color Image Scanner
Cartridge

You can easily convert your printer into a color scanner by installing the optional IS-22
Color Image Scanner Cartridge. This section describes how to install and remove the Color
Image Scanner Cartridge. For details on operating the printer as a scanner, see the

 IS-22

Color Image Scanner Cartridge User's Manual

 that comes with the scanner cartridge.

 

Do not touch the contact terminals or the scanning head.

Installing the Color Image Scanner Cartridge

1

Remove the BJ
Cartridge.

Open the front cover and press the CARTRIDGE button. The printer beeps
once, the POWER light starts flashing, and the cartridge holder moves to the
center of the printer. 
Lift the green lock lever. 
Slide the BJ cartridge out of the cartridge holder. 
Store the BJ cartridge in an Ink Cartridge Storage Box (see page 4-22 for
details). 

4300 Chapter 4 Page 24

2

Summary of Contents for BJC-4300 Series





































































































Reviews:

No comments