Canon BJC-4300 Series, User Manual, Page: 43 / 100

Do not leave the film in the sheet feeder for long periods of time. Dust and dirt may
accumulate on the film resulting in spotty printing.
To avoid smudging caused by finger prints, use a pair of thin cloth gloves while
handling the film.
To avoid fading, do not expose the printed film to prolonged sunlight.
Store unused film at temperatures between 59ºF to 86ºF (15ºC to 30ºC). The relative
humidity should be between 10% and 70%.
Uncurling Back Print Film
If Back Print Film becomes curled, follow these steps to uncurl it:
1
Cover the
non-glossy side of
the film with a
sheet of plain
paper.
2
Roll the film and
paper up in the
direction
opposite the
curl. Do not roll the film too tight.
The film and paper rolled together should be about one inch (2.5cm) in
diameter.