Canon BJC-3000 Series Reference Manual Download Page 224

Page: 224 / 350

224

Troubleshooting - Printout is Unsatisfactory

Colours streaked or uneven

Check 2

Is Halftoning set for optimum performance?

Check the Halftoning setting in the Quality tab of the printer driver. The Dif-
fusion setting smoothes uneven or streaked colours.

Open the Printer Properties dialogue box.

Click the Advanced button in the Main tab.

In the Halftoning box under the Quality tab, disable Auto if it is checked and

enabled.

Click Diffusion and click the OK button.

When using Manual for printing, click the Details button in the Printer Prop-

erties dialogue box.

In the Quality panel, set Halftoning to Scatter.

Windows

Macintosh

Summary of Contents for BJC-3000 Series































































































































































































































































































































































Search results

Summary of Contents for BJC-3000 Series

Reviews:

Canon BJC-3000 Series, Reference Manual, Page: 224 / 350

Search results

Summary of Contents for BJC-3000 Series

Reviews: