BESTEM – D01R
5.
DBI
／
Pf Inspection
When DBI/Pf Inspection button in recognition main screen is clicked, the following screen will be displayed
and DBI/AgP Inspection teaching can be done. Set according to
①～⑤
sequence. Set basic screen and
basic operation as in chip recognition.
①
④
③
②
⑤
⑥
⑦
⑧
⑨
⑩
①
DBI-Pf Inspection setting tab
(Item: Pf Base , Island Template , Pf Position/quantity )
* The contents of each item change by the change of Normal user/Super user.
②
SuperUser button
With SuperUser button, DBI-Pf inspection parameter setting tab can be change between Normal user and
super user.
※
When DBI
－
Pf inspection setting tab is at super user, the button name will change from
SuperUser to NormalUser .
③
Apply button
Saves DBI/AgP Inspection parameter. If Return is clicked without clicking Apply button first, setting will
return to previously saved setting.
④
Rec exe button
Perform DBI-AgP inspection trace position. Check if the parameters are appropriate.
⑤
NGImage
button
View DBI-Pfinspection most recent NG image
P
．
20
