Canon Arizona 135 GT Operation Manual Download Page 75

Page: 75 / 234

Select the

Create Batch

icon to open the batch editor.

[26] Create a Batch Job

Provide a name for the batch job in the

Batch name:

field.

Select the

Batch type

: either Composite or Collation

Add jobs to the batch either by double-clicking or selecting a job and then clicking the

+ Add

button.

Use the mouse to place the selected images within the rectangle that represents the media in the
Preview pane.

NOTE

Placement of images can be changed at any time by editing the batch job or by clicking
the + to the left of the batch job name, selecting one of the included images, and then
moving that image with the mouse.

Important

: If you delete a batch job all of its component jobs are deleted and are no

longer available unless sent from the RIP again.

Batch Mode Printing

Chapter 4 - Operate the Printer

Summary of Contents for Arizona 135 GT











































































































































































































































Search results

Summary of Contents for Arizona 135 GT

Reviews:

Canon Arizona 135 GT, Operation Manual, Page: 75 / 234

Search results

Summary of Contents for Arizona 135 GT

Reviews: