Canon Arizona 135 GT, Operation Manual, Page: 41 / 234

Component Function
10) Vacuum Zone Control
Handles (image 2) Five vacuum zone control handles determine if vacuum zones 2 to
6 on the printer table are active when the vacuum pump is switch-
ed on. Zone 1 is always on so it has no control handle.
11) Automatic Maintenance
Station Provides a station where printheads can be parked on a vacuum
system that pulls debris and particulate matter from the nozzles.
12) Ink Filters Remove unwanted particulate matter from the ink. Ink filters are
located behind a door under the ink bags.
(13) Coolant Bottle Provides coolant to maintain correct temperature of the ink in the
printheads.
(14) Vacuum Table Foot
Switch Toggles the pump that turns the table vacuum on/off. Vacuum
must be on prior to starting a print.
(15) Ink Bay There are two ink bays: the Primary bay contains CMYK ink and
the coolant bottle; the Secondary bay holds any additional suppor-
ted colour channels.
(16) Static Suppression Bar
(optional) Reduces static charge on the media. Results in less ink misting on
the printed image.
[18] Ink Bays and Vacuum Zone Control Handles
Operator Interface Hardware
Chapter 3 - Navigate the User Interface 41