Canon AG1, Service Manual

Page: 44 / 56

4
4
4-21
4-21
Parts Replacing and Cleaning > Disassembly/Assembly > Removing the Cassette Module Controller PCB > Procedure
Parts Replacing and Cleaning > Disassembly/Assembly > Removing the Cassette Module Controller PCB > Procedure
2) Remove the Cassette 2 Auto Close Unit [1].
• 1 Wire Saddle [2]
• 1 Connector [3]
• 2 Screws [4]
• 1 Boss [5]
• 1 Hook [6]
2x
1x
1x
[1]
[2]
[3]
[6]
[5]
[4]
NOTE: How to install the Cassette 2 Auto Close Unit
Be sure to install the spring [1] of the Cassette 2 Auto Close Unit to the inner side of the
plate [A] of the Rear Plate.
[1]
[A]
F-4-61
F-4-60
Removing the Cassette Module Controller PCB
■
Preparation
1) Remove the Rear Cover(Refer to page 4-9).
■ Procedure
1) Remove the Cassette Module Controller PCB [1].
• 4 Connectors [2]
• 2 Screws [3]
• 2 Hooks [4]
2x
4x
[2]
[2]
[1]
[4]
[3]
[3]
F-4-62
F-4-63