Canon 9442a008 - EOS 20D Digital Camera SLR Page 30 Instruction Manual Download

Page: 30 / 168

Menu Operations

Display the menu.

Press the <

> button to display

the menu. To turn off the menu, press
the button again.

Select a menu item.

Turn the <

> dial to select the menu

item, then press <

Press the <

> button to jump to

the ﬁrst item of each menu category.

Select the menu setting.

Turn the <

> dial to select the

desired setting.

Set the desired setting.

Press <

> to set it.

Exit the menu.

Press the <

> button to exit the

menu display.

Menu Setting Procedure

When a Basic Zone mode is set, there are menu items which will not be
displayed. (p.31)

You can also use the <

> dial to select menu items or playback images.

The explanation of menu functions hereinafter assumes that you pressed
the <

> button to display the menu screen.

Menu operation will also work after the picture is taken while the image is
being recorded to the CF card (access lamp blinks).

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR









































































































































































Search results

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR

Reviews:

Related manuals for 9442a008 - EOS 20D Digital Camera SLR

Brands by name

Popular brands

Canon 9442a008 - EOS 20D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR

Reviews:

Related manuals for 9442a008 - EOS 20D Digital Camera SLR

Brands by name

Popular brands