Canon 9442a008 - EOS 20D Digital Camera SLR Page 161 Instruction Manual Download

Page: 161 / 168

161

Specifications

• External Speedlite

EOS-dedicated Speedlite: E-TTL II autoﬂash with EX-series Speedlite
PC terminal:

Provided

Zooming to match
lens focal length:

Provided

• Drive System

Drive modes:

Single, continuous, and Self-timer (10 sec.)

Continuous:

Max. 5 shots per sec.

Max. burst:

JPEG* (Large/Fine): Approx. 20, RAW: Approx. 6
* Varies depending on the subject, ISO speed,

processing parameters, CF card, etc.

• LCD Monitor

Type:

TFT color liquid-crystal monitor

Monitor size:

1.8 in.

Pixels:

Approx. 118,000

Coverage:

100% with respect to the effective pixels

Brightness adjustment: Five levels provided
Interface languages:

• Image Playback

Display format:

Single image, shooting information, 9-image index,
magniﬁed view (Approx. 1.5x - 10x), autoplay, image
rotation, and jump

Highlight warning:

In the shooting information mode, any overexposed
highlight areas with no image infomation will blink.

• Image Protection and Erase

Protect:

Single images can be erase-protected or not.

Erase:

One image or all images in the CF card can be erased
(except protected images).

• Direct Printing

Compatible printers:

CP Direct, Bubble Jet Direct, and PictBridge-compatible
printers

Printable images:

JPEG images (DPOF printing possible)

• Customization

Custom Functions:

18 Custom Functions with 50 settings

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR









































































































































































Search results

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR

Reviews:

Related manuals for 9442a008 - EOS 20D Digital Camera SLR

Brands by name

Popular brands

Canon 9442a008 - EOS 20D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR

Reviews:

Related manuals for 9442a008 - EOS 20D Digital Camera SLR

Brands by name

Popular brands