Canon 9442a008 - EOS 20D Digital Camera SLR Page 34 Instruction Manual Download

Page: 34 / 168

Set the date and time as shown below.

Select [Date/Time].

Turn the <

> dial to select [

Date/

Time

], then press <

The date/time screen will appear.

Set the date and time.

Turn the <

> dial to select the digit,

then press <

The selection will then shift to the
next item.

Set the date display format.

Turn the <

> dial to set the date

format to [

mm/dd/yy

], [

dd/mm/yy

], or

[

yy/mm/dd

Press <

The date and time will be set and the
menu will reappear.

Setting the Date and Time

Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure you set the date and time correctly.

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR









































































































































































Search results

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR

Reviews:

Related manuals for 9442a008 - EOS 20D Digital Camera SLR

Brands by name

Popular brands

Canon 9442a008 - EOS 20D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 9442a008 - EOS 20D Digital Camera SLR

Reviews:

Related manuals for 9442a008 - EOS 20D Digital Camera SLR

Brands by name

Popular brands