manualshive.com logo in svg

Canon 8297A002, User Manual

Share
Download
Canon 8297A002 User Manual Download Page 11

 

X

 

Preface

 

Maintenance

WARNING

 

• Do not service the machine yourself except as specifically described in this guide. If further 

servicing is required, contact the Canon Customer Care Center.

 

• Keep the machine clean. Dust accumulation may prevent the machine from operating properly.

CAUTION

 

• Close the document cover and scanning unit gently to 

avoid catching your hand. Failing to do so may result in 
personal injury. 

• Do not press down hard on the document cover or 

 ADF when using the platen glass to scan thick 

books. This may damage the platen glass and/or result 
in personal injury.

• Do not place the following objects on top of the machine. If such objects come into contact 

with internal electrical components, the machine may short-circuit resulting in fire or 
electrical shock.
– Metallic objects such as jewelry and watches
– Containers of water or other liquids such as glasses, vases, or pot plants
If water etc. does spill inside the machine, turn off the power immediately, disconnect the 
power cord and contact the Canon Customer Care Center.

• Do not touch the high-voltage electrical parts as this may result in electrical shock.
• Do not place heavy objects on top of the machine as these may topple over and result in 

injury.

• Do not insert your hands into the machine while it is printing as parts inside the machine are 

moving and this may result in injury.

• After printing, do not touch the electrical contacts of the printhead. They will be hot and may 

result in burns or electrical shock.

 

• Do not subject the machine to strong physical shock or 

vibration.

• Turn off the power and unplug the machine before moving 

it.

• Do not lift the machine by any of its attachments. Lift it by 

the recessed areas on the sides of the machine.

• A distinct change in performance may indicate a need for 

servicing.

Fax Model

Summary of Contents for 8297A002




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands