Canon 8117A001AA - PowerShot S45 4MP Digital Camera, User Manual

Page: 132 / 188

126
Connecting the Camera to a Printer
You can make clear prints swiftly and easily when you connect the camera to a
direct print function compatible printer (optional) or a direct print function
compatible Bubble Jet printer (optional). It can also be used with DPOF print
settings.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• You are recommended to use the optional AC Adapter Kit ACK700 to power the
camera when it is connected to the printer. If you are using a battery pack, ensure
that it is fully charged.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Refer to the System Map included with this camera kit for printer information.
• Please see your printer ’ s user guide for instructions on loading paper and installing
ink cartridges.
Connecting to a Direct Print Function Compatible Printer
Two direct interface cables are supplied with the printer. Use the cable (DIF-100)
that has a Symbol on the connector to connect to this camera.
1
Turn off the camera (p. 24).
2
Attach the power cable to the printer and plug the other end
into power supply, or install the printer’s rechargeable battery.
• Depending on the type of printer you have, it may or may not use
rechargeable batteries. Refer to your printer ’ s user guide.
3
Connect the camera and printer using
the direct interface cable.
• When you insert the cable, make sure the
mark of the cable faces the rear of the camera
(monitor side).
Direct Interface
Cable DIF-100
DIGITAL Terminal
to Printer