manualshive.com logo in svg

Canon 8117A001AA - PowerShot S45 4MP Digital Camera, User Manual, Page: 173 / 188

Share
Download
Canon 8117A001AA - PowerShot S45 4MP Digital Camera User Manual Download Page 173

167

Appendix

Troubleshooting

• Turn on the camera.   See 

Turning the Power On / Off

(p. 24).

• Confirm that the CF card slot/battery cover is securely

closed.

• Fully charge the battery or use a household power

source.

• Wipe the terminals with a clean, dry cloth.

• Switch the camera to Shooting mode.

See

Switching between Shooting and Replaying

 (p. 26).

• Wait until the orange indicator stops blinking and lights

steadily, signalling that the flash is charged, then press

the shutter button.

• Insert a new CF card.

• If required, download the images to a computer and

erase them from the CF card to make space.

• Format CF card.   See 

Formatting a CF card

 (p. 121).

• If reformatting doesn't work, the CF card logic circuits

may be damaged. Contact the nearest Canon Customer

Support Help Desk.

• Close the CF card slot/battery cover, then turn off the

camera.

• Close the CF card slot/battery cover, then close the lens

cover.

• The lens does not retract in this case. To make the lens

retract, close the lens cover.

Problem

Cause

Solution

Power is not turned on

CF card slot/battery cover

opened

Insufficient battery voltage

Poor contact between

camera and battery

terminals

Camera is in Replay or

computer/printer mode

Flash is charging (blinking

orange indicator)

CF card full

CF card not formatted

correctly

CF card slot/battery cover

opened with camera on

CF card slot/battery cover

opened while camera was

recording to CF card

(warning signal)

Switched to Replaying mode

from Shooting mode

Camera will

not operate

Camera will

not record

Lens will not

retract

Summary of Contents for 8117A001AA - PowerShot S45 4MP Digital Camera





























































































































































































Reviews:

No comments