Canon 8117A001AA - PowerShot S45 4MP Digital Camera, User Manual, Page: 21 / 188

15
Preparing the Camera, Basic Functions
Charging the Battery Pack
Recharge Battery Pack NB-2L (supplied) with Battery Charger CB-2LT or CB-2LTE before you use the
camera for the first time and subsequently when the “Charge the battery pack” message is displayed.
1
Align the edge of the battery pack with
the line on the battery charger, then slide
the battery in the direction of the arrow.
2
Battery charger model names and types
vary by region.
(For CB-2LT)
Plug the battery charger into a power
outlet.
(For CB-2LTE)
Attach the power cord to the battery
charger and plug it into a power outlet.
(For CB-2LT and CB-2LTE)
• The charge indicator will light red while the
battery pack is charging. It will change to a
steady green when the charge is complete.
• After charging, unplug the battery charger and
remove the battery pack from it.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• To protect and prolong the life of the battery pack, do not charge it for 24 hours
or longer at a time.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• This is a lithium ion battery pack so there is no need to completely use or
discharge it before recharging. It can be recharged at any time.
• It takes approximately 80 minutes to bring a fully discharged battery pack to full
charge (based on Canon’s testing standard). Charge it within a temperature range
of 5 to 40º C (32 to 104º F).
• Charging times will vary according to the surrounding humidity and battery pack
charge state.
• You may hear a noise during charging. This is not a malfunction.
Preparing the Camera
Charge Indicator
CB-2LT
Charge Indicator
CB-2LTE