![background image](http://html1.mh-extra.com/html/canon/7215-lv-xga-lcd-projector/7215-lv-xga-lcd-projector_specification_4019829014.webp)
Basic Serial Functional Specification for LV-5210/7215/7210
6.31 IMAGE (Toggle) COMMAND
COMMAND “C27” [CR]
Detail
Switch Image setting status.
This command works the same as the remote control’s “Image” button or the
key on the projector body.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
6.32 ON START SETTING COMMAND
COMMAND “C28” [CR]
Detail
Set to Power ON setting status
This setting status is stored in EEPROM, even if the power is ON/OFF.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
6.33 ON STARTCANCELLATINO COMMAND
COMMAND “C29” [CR]
Detail
Cancel Power ON Start
This status is stored in EEPROM even when power is OFF or ON
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
6.34 Power Management Ready COMMAND
COMMAND “C2A” [CR]
Detail
Set Power Management to Ready
This status is stored in EEPROM, so even if turning off and on.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
6.35 Power Management OFF COMMAND
COMMAND “C2B” [CR]
Detail
Set Power Management to OFF mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
6.36 Power Management Shut down COMMAND
COMMAND “C2E” [CR]
Detail
Set Power Management to Shut down mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
Page
14