Canon 4400B001 Instruction Manual Download

Page: 95 / 116

READING THE BUILT-IN MEMORY

- Reading data from the built-in memory.

READING THE CARD

- Reading data from the memory card.

SCENE RECORDED USING ANOTHER DEVICE. CANNOT DIVIDE THE SCENE.

- Scenes recorded with another device cannot be divided using this camcorder.

SOME

PHOTOS COULD NOT BE DELETED

- Protected photos cannot be deleted.

ancel the protection setting before deleting.

SOME SCENES COULD NOT BE ADDED

- Scene could not be added to the playlist. The playlist cannot contain more than 99 scenes. Delete some

scenes from the playlist (

55).

SOME SCENES COULD NOT BE DELETED

- Movies that were protected/edited with other devices cannot be deleted.

TASK IN PROGRESS DO NOT DISCONNECT THE POWER SOURCE

- The camcorder is updating the memory. Do not disconnect the compact power adapter or remove the battery

pack.

THE CAMCORDER IS SET TO MOVIE MODE

- You pressed

while the camera mode dial was set to

THE CAMCORDER IS SET TO PHOTO MODE

- You pressed

while the camera mode dial was set to

THE CARD IS SET FOR ERASURE PREVENTION

- The LO

K switch on the SD or SDH

memory card is set to prevent accidental erasure.

hange the position of

the LO

K switch.

THE MEMORY CARD COVER IS OPEN

- After inserting a memory card, close the memory card slot cover (

30).

THIS

PHOTO COULD NOT BE DELETED

- Protected photos cannot be deleted.

ancel the protection setting before deleting.

TOO MANY PHOTOS DISCONNECT USB CABLE

- Disconnect the USB cable and decrease the number of photos on the memory card to fewer than 1,800.

If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the
connection after a short while.

TRANSFER ORDER ERROR

- You attempted to set more than 998 transfer orders. Reduce the number of photos marked with transfer

orders.

UNABLE TO RECOGNIZE THE DATA

- A memory card with data recorded in a different television system (PAL or SE

AM) was inserted into the

camcorder.

UNABLE TO RECOVER DATA

ould not recover a corrupted file.

PHOTO

Start/Stop

Summary of Contents for 4400B001





















































































































Search results

Summary of Contents for 4400B001

Reviews:

Related manuals for 4400B001

Brands by name

Popular brands

Canon 4400B001, Instruction Manual

Search results

Summary of Contents for 4400B001

Reviews:

Related manuals for 4400B001

Brands by name

Popular brands