52
Before You Start
To save battery power, the camera turns off automatically after a certain
time of non-operation. You can change this auto power-off time. If you
do not want the camera to turn off automatically, set this to [
Off
]. After
the power turns off, you can turn on the camera again by pressing the
shutter button or other button.
1
Select [Auto power off].
Under the [
5
] tab, select [
Auto
power off
], then press <
0
>.
2
Set the desired time.
Turn the <
5
> dial to select the
setting, then press <
0
>.
Prevents the beeper from sounding when focus is achieved.
1
Select [Beep].
Under the [
2
] tab, select [
Beep
], then press <
0
>.
2
Select [Off].
Turn the <
5
> dial to select [
Off
], then press <
0
>.
This prevents shooting if there is no card in the camera.
1
Select [Release shutter without card].
Under the [
2
] tab, select [
Release shutter without card
], then
press <
0
>.
2
Select [Disable].
Turn the <
5
> dial to select [
Disable
], then press <
0
>.
3
Set the Power-off Time/Auto Power Off
3
Silencing the Beeper
3
Card Reminder
Even if [
Off
] has been set, the LCD monitor will turn off automatically after
30 min. to save power. (The camera’s power does not turn off.)
COP
Y
