167
You can edit out the first and last scenes of a movie in 1-sec. increments.
1
On the movie playback screen,
select [
X
].
X
The editing screen will be displayed.
2
Specify the parts to be edited out.
Select either [ ] (Cut beginning) or
[ ] (Cut end), then press <
0
>.
Tilt <
9
> to the left or right to see the
previous or next frames. Holding it down
will fast forward the frames. Turn the
<
5
> dial to browse frame-by-frame.
After deciding which part to edit out, press
<
0
>. The portion highlighted in blue on
the top of the screen is what will remain.
3
Check the editing.
Select [
7
] and press <
0
> to playback
the portion highlighted in blue.
To change the editing, go back to step 2.
To cancel the editing, select [ ] and
press <
0
>.
4
Save the movie.
Select [ ], then press <
0
>.
X
The save screen will appear.
To save it as a new movie, select
[
New file
]. Or to save it and overwrite
the original movie file, select
[
Overwrite
]. Then press <
0
>.
X
Editing the Movie’s First and Last Scenes
Since the editing is done in 1-sec. increments (position indicated by [
X
]), the exact
position where the movie is edited may differ slightly from the position you specified.
If the card does not have enough room, [
New file
] will not be selectable.
More movie editing functions are available with ZoomBrowser EX/
ImageBrowser (provided software).
COP
Y
