Canon 3822B002 Instruction Manual Download Page 166

Page: 166 / 276

166

Playing Movies

Function

Playback Description

Exit

Returns to the single-image display.

Play

Pressing <

> toggles between play and stop.

Slow motion

Adjust the slow motion speed by turning the <

> dial. The

slow-motion speed is indicated on the upper right.

First frame

Displays the movie’s first frame.

Previous frame

Each time you press <

>, a single previous frame is

displayed. When you hold down <

>, it will rewind the

movie.

Next frame

Each time you press <

>, the movie will play frame-by-

frame. When you hold down <

>, it will fast forward the

movie.

Last frame

Displays the movie’s last frame.

Edit

Displays the editing screen (p.167).

Playback position

mm’ SS”

Playback time

Volume

You can adjust the built-in speaker’s sound volume by

turning the <

> dial.

With a fully-charged Battery Pack LP-E4, the continuous playback time
at 23°C/73°F will be as follows: Approx. 9 hr. 20 min.

During the single-image display, press the <

> button to switch the

display format (p.156).

If you took a still photo while you shot the movie, the still photo will be
displayed for approx. 1 sec. during the movie playback.

If you connect the camera to a TV set (p.170, 171) and playback a
movie, adjust the sound volume with the TV set. Turning the <

> dial

will not change the sound volume.

COP

Summary of Contents for 3822B002





















































































































































































































































































Search results

Summary of Contents for 3822B002

Reviews:

Canon 3822B002, Instruction Manual, Page: 166 / 276

Search results

Summary of Contents for 3822B002

Reviews: