manualshive.com logo in svg

Canon 3670C005, Instruction Manual

Share
Download
Canon 3670C005 Instruction Manual Download Page 19

19

Preparing the Power 

S

upply

• If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the 

battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day 

before, to ensure a full charge.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

• For handling precautions regarding the battery pack, refer to 

Safety Instructions and Handling Precautions

 

(

A

113). For charging times and approximate usage times, refer to 

Reference Tables

 (

A

123).

Checking the Remaining Battery Charge

With the camcorder turned off, press the BATT. INFO button to 
display for about 5 seconds a screen showing the approximate 
battery charge level. Note that if the battery charge is too low, 
the battery information screen may not appear.

Summary of Contents for 3670C005
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands