manualshive.com logo in svg

Canon 3670C005, Instruction Manual

Share
Download
Canon 3670C005 Instruction Manual Download Page 116

S

afety In

s

truction

s

 and Handling Precaution

s

116

Lithium Button Battery

• Do not pick up the battery using tweezers or other metal tools, as this will cause a short circuit.

• Wipe the battery with a clean dry cloth to ensure proper contact.

WARNING

• The battery used in this device may present a fire or chemical burn hazard if mishandled.

• Do not disassemble, modify, immerse in water, heat above 100 °C or incinerate the battery.

• Do not insert the battery into the mouth. If swallowed, seek medical assistance immediately. The battery 

case may break and the battery fluids may cause internal injuries.

• Keep the battery out of the reach of children.

• Do not recharge, short-circuit or insert the battery in the wrong direction.

• The used battery should be returned to the supplier for safe disposal.

Summary of Contents for 3670C005
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands