Canon 3635B001 - PowerShot S90 Digital Camera Page 122 User Manual Download

Page: 122 / 179

122

You can magnify the area of a recorded image that was inside the AF Frame,

or the area of a face that was detected, to check the focus.

Press the

button, and switch

to the focus check display (p. 44).

A white frame will appear where the AF
frame or face was when the focus was
set.

A gray frame will appear on a face
detected during playback.

The area within the orange frame appears
magnified.

Switch frames.

●

Move the zoom lever toward

once.

The screen at the left will appear.

●

Press the

button to move to a different

frame when multiple frames appear.

Change the magnification level or
location.

●

Use the zoom lever to change the display
size, and the

opqr

buttons to change

the display position while checking the
focus.

●

Pressing the

button resets the

display to Step 1.

Checking the Focus

Summary of Contents for 3635B001 - PowerShot S90 Digital Camera




















































































































































































Search results

Summary of Contents for 3635B001 - PowerShot S90 Digital Camera

Reviews:

Related manuals for 3635B001 - PowerShot S90 Digital Camera

Brands by name

Popular brands

Canon 3635B001 - PowerShot S90 Digital Camera, User Manual

Search results

Summary of Contents for 3635B001 - PowerShot S90 Digital Camera

Reviews:

Related manuals for 3635B001 - PowerShot S90 Digital Camera

Brands by name

Popular brands