Canon 3508B001 - PowerShot D10 Digital Camera, User Manual

Page: 105 / 163

105
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slideshow].
●
Press the
n
button and select the
1
tab, then select [Slideshow] and press the
m
button.
Select [Start].
●
Press the
op
buttons to select [Start],
then press the
m
button.
A few seconds after “Loading image…”
displays, the slideshow will start.
●
You can pause/restart a slideshow by
pressing the
m
button again.
●
Press the
n
button to stop the
slideshow.
Changing Settings
You can change the time that slideshow images are displayed, transition
effects and set the slideshow to repeat. You can select from seven transition
effects when switching between images. You can also select which images
to play back.
Select [Slideshow].
●
Press the
n
button and select the
1
tab, then select [Slideshow] and press the
m
button.
Make the setting.
●
Press the
op
buttons and select an item,
then press the
qr
buttons and adjust the
setting.
. Viewing Slideshows
•
If you press the
qr
buttons during playback, the image will switch. If you
press and hold down the
qr
buttons you can fast-forward through
images.
•
The power saving function does not work during slideshows (p. 53).
(EC256)_CDI-E404_Guide_E.book Page 105 Friday, February 6, 2009 7:44 PM
CO
PY