manualshive.com logo in svg

Canon 2MC - Elura 2MC MiniDV Digital Camcorder, Instruction Manual

Share
Download
Canon 2MC - Elura 2MC MiniDV Digital Camcorder Instruction Manual Download Page 27

27

E

Mastering 

the Basics

Built-in speaker

Adjust the speaker volume by turning the SELECT dial.
• Turn the SELECT dial up to increase the volume, and down to lower the

volume.

• A VOLUME bar appears in the display to indicate the current volume. It

disappears in 4 seconds.

• You can turn off the volume completely by turning the SELECT dial down until

OFF appears.

• You can also adjust the headphone volume separately from the built-in speaker.

(Use the DU-300 Docking Unit to connect the headphones, p.65.) 

• The levels you adjust for the built-in speaker and headphones are memorized

separately. The camera remembers your levels even if you turn the camera off
and back on again.

• The speaker turns off when the camera is set to any mode other than VCR or

when you use headphones.

• Sometimes audio may sound distorted when the volume is turned up high. If

this happens, turn down the volume.

O F F

POWER

VC

R

P.SCAN

MO

VIE

The camcorder has a built-in speaker so you can review the sound track alongside
the picture during playback. 

 2_ELURA2_E(08-32)  7/25/00 17:03  Page 27

Summary of Contents for 2MC - Elura 2MC MiniDV Digital Camcorder




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands