Canon 2MC - Elura 2MC MiniDV Digital Camcorder Instruction Manual Download

Page: 109 / 147

109

Using the MultiMediaCard

(ELURA2 MC only)

Copying Still Images from a Cassette

-ELURA2 MC only-

ON/
OFF

D.EFFECTS

SLIDE SHOW

REC SEARCH

CARD

Copies multiple still images from a tape to the MultiMediaCard, using the Photo
Search function.
• The still images' data codes will reflect the date and time the copies are made.

Make sure a MultiMediaCard that has enough memory available and a recorded
cassette have been inserted into the camera.

1. Locate the first still image on the cassette that you want to copy

and stop the cassette at a point before that image.

• All the still images on the cassette after that point will be copied onto the

MultiMediaCard.

• If you want to copy all the images on a cassette, rewind the cassette to the

beginning.

2. Open the menu and select CARD OPER.

3. Select COPY

4. Select EXECUTE.

• Select CANCEL to stop copying.
• Cassette and card information appear in the display and copying starts.
• NOW COPYING

appears in the display.

• The camera automatically performs the Photo Search function to locate still

images and copying starts. The currently copying image appears in the
display.

• Copying stops when the cassette is finished or the MultiMediaCard is full.

When the MultiMediaCard is full, CARD FULL will appear in the display.

5. Press the stop button when your desired images have finished

copying.

[ ]

COPY

CARD OPER.

[ ]

(

34)

VCR

5_ELURA2_E(93-115) 7/25/00 17:25 Page 109

Summary of Contents for 2MC - Elura 2MC MiniDV Digital Camcorder




















































































































































Search results

Summary of Contents for 2MC - Elura 2MC MiniDV Digital Camcorder

Reviews:

Related manuals for 2MC - Elura 2MC MiniDV Digital Camcorder

Brands by name

Popular brands

Canon 2MC - Elura 2MC MiniDV Digital Camcorder, Instruction Manual

Search results

Summary of Contents for 2MC - Elura 2MC MiniDV Digital Camcorder

Reviews:

Related manuals for 2MC - Elura 2MC MiniDV Digital Camcorder

Brands by name

Popular brands