Canon 2300N - ImageCLASS B/W Laser, Reference Manual, Page: 83 / 197

Specifying Common Settings 3-16
Selecting and Stor
ing Settings
3
●
To make the stack bypass or paper drawer ineligible for APS/ADS:
❑
Select <01 OFF>.
Repeat the procedure from step 3 to continue APS/ADS settings.
NOTE
If you select <02 ON> for the stack bypass, press (
▼
) or (
▲
) to select
the paper size to be used on the stack bypass
➞
press (OK).
6
Press [Reset] to return to the Basic Features screen.
Standard Paper for the Stack Bypass
This mode enables you to set the standard paper size for the stack bypass, if you
always use the same size paper. This way you do not need to select the paper size
each time you use the stack bypass.
IMPORTANT
If you set the standard paper size for the stack bypass, you cannot select the paper size
when you use the stack bypass.
NOTE
The default setting is '01 OFF'.
1
Press [Additional Functions]
➞
press [F3] (
▼
) or [F4] (
▲
) to
highlight <01 COMMON SETTINGS>
➞
press [OK].
The COMMON SETTINGS menu appears.
F3 F4
Reset
Additional Functions
F3
F4
OK