Canon 2300N - ImageCLASS B/W Laser, Reference Manual, Page: 181 / 197

List of Error Messages 7-26
T
roub
leshooting
7
TRANSMITTING...
Cause 1 During the current transmission, your machine may have tried to send a
document identified from the list of documents in memory.
Remedy Resend the document when transmission of the first document is complete.
Cause 2 You tried to send a document using direct sending while sending another
document from memory.
Remedy Wait until the transmission from memory is complete. Then resend the
document using direct sending.
TX LIMIT REACHED
Cause Sending has been restricted.
Remedy Set <RESTRICT TX> from the DEPT. ID MANAGEMENT menu to 'OFF'. (See
"Restrictions Using Department ID Management," on p. 5-17.)
WRONG PAPER SIZE SETTING
Cause It is possible that the paper size detected automatically by the paper drawer
does not match the actual paper size. Another possibility is that the paper
size selected for the stack bypass in the USE STACK BYPASS menu does
not match the paper size actually set on the stack bypass.
Remedy Make sure the actual paper size matches the selected paper size. Set the
correct paper size and open the front cover, then close it.