manualshive.com logo in svg

Canon 2207C001, User Manual

Share
Download
Canon 2207C001 User Manual Download Page 259

Could not connect using the wireless LAN. (for wireless LAN communication)

Wireless LAN communication failed due to an error.

●

Wait for a while, and set again. If you still cannot get connection, turn OFF the machine and then restart it.

Could not connect using WPS.

When automatic setting with WPS was attempted, the connection failed due to an error.

●

Wait for a while, and set again. If the problem persists, check whether the wireless router supports WPS.

If WPS is supported:

Check whether the machine is properly installed and ready to connect to the network.

Installation/Settings Problems(P. 230) 

If WPS is not supported:

Set using another connecting method.

Connecting to a Wireless LAN(P. 24) 

Could not detect any connections from wireless devices.

Mobile device detection was not possible within the predetermined length of time.

●

Connect again paying attention to the time limit.

Connecting Directly (Access Point Mode)(P. 112) 

Could not perform cleaning.

Paper jammed during cleaning.

●

Remove the jammed paper, set paper correctly, and perform cleaning again.

Clearing Paper Jams(P. 261) 
Cleaning the Fixing Assembly(P. 208) 

Could not perform Shared Key auth. Check WEP settings.

The network key (the WEP key) of a wireless router to be connected is not set to the machine correctly.

●

Check the network key (the WEP key) of the wireless router, and set it to the machine again.

Checking the SSID and Network Key(P. 35) 
Setting Up Connection by Specifying Detailed Settings(P. 32) 

●

Connect again by selecting a wireless router or by manually changing the WEP authentication method to
<Open System>.

Setting Up Connection by Selecting a Wireless Router(P. 30) 
Setting Up Connection by Specifying Detailed Settings(P. 32) 

Troubleshooting

254

Summary of Contents for 2207C001












































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands