Canon 2064B001 - DC 210 Camcorder Page 67 Instruction Manual Download

Page: 67 / 85

Trouble?

Ad
di

tio
n

al In

for
m

ati
o

Recording

The disc cannot be ejected.

Turn off the camcorder, disconnect the compact power adapter
and remove the battery pack. Restore the power supply and try
again.

–

The camcorder has exceeded its operational temperature. Turn
off the camcorder and let it cool down before resuming use.

The disc cannot be recognized. The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If

the problem persists replace the disc.

The disc is not correctly loaded. Check the disc.

Verify that the camcorder supports the type of DVD disc you
inserted.

The camcorder vibrates.

Depending on the condition of the disc, the camcorder might
vibrate occasionally. This is not a malfunction.

–

• The disc’s rotation can be

faintly heard.

• Occasionally the operation

sound can be heard.

The disc is activated from time to time. This is not a malfunction.

–

After using the camcorder for a
long time, “

” lights up in red.

This is not a malfunction. Turn the camcorder off and let it cool
for a while before resuming operation.

–

Problem

Solution

Image will not appear on the
screen.

Set the camcorder to

Open the lens cover.

“SET THE TIME ZONE, DATE
AND TIME” appears on the
screen.

Set the time zone, date and time.

Recharge the built-in lithium battery and set the time zone, date
and time.

Pressing the start/stop button
will not start recording.

Set the camcorder to

Load a recommended disc.

The disc is full (“

END” flashes on the screen). Delete some

recordings (DVD-RW in VR mode) to free some space or
replace the disc.

22
55

The camcorder has exceeded its operational temperature. Turn
off the camcorder and let it cool down before resuming use.

–

Remove the disc protection.

Unfinalize the disc (DVD-RW in VIDEO mode).

Even after stopping recording,
the disc access indicator does
not go off.

The scene or still image is being recorded on the disc. This is
not a malfunction.

28
30

The point where the start/stop
button was pressed does not
match the beginning/end of the
recording.

There is a slight interval between pressing the start/stop button
and the actual start of the recording on the disc. This is not a
malfunction.

–

Problem

Solution

D121C_NTSC-E.book Page 67 Thursday, January 11, 2007 2:46 PM

Summary of Contents for 2064B001 - DC 210 Camcorder






















































































Search results

Summary of Contents for 2064B001 - DC 210 Camcorder

Reviews:

Related manuals for 2064B001 - DC 210 Camcorder

Brands by name

Popular brands

Canon 2064B001 - DC 210 Camcorder, Instruction Manual

Search results

Summary of Contents for 2064B001 - DC 210 Camcorder

Reviews:

Related manuals for 2064B001 - DC 210 Camcorder

Brands by name

Popular brands