99
E-TTL II autoflash obtains high-precision and consistent flash shots.
If necessary,
the built-in flash will pop-up automatically
in low-light
or backlit conditions. (except in <
3
> <
5
> <
7
> modes)
Regardless of the light level,
you can press the <
D
> button to pop-up
and fire the built-in flash whenever desired.
If the built-in flash has
popped up, you can push it back down with your fingers.
d
:
For fully automatic flash photography.
The shutter speed
(1/ 60 sec. - 1/250 sec.) and aperture are set automatically.
s
:
Enables you to set the desired shutter speed (30 sec. - 1/
250 sec.).
The flash exposure will be set automatically to match
the aperture that was set automatically.
f
:
Enables you to set the desired aperture.
The flash exposure
will be set automatically to match the aperture that was set.
The
shutter speed will set automatically between 30 sec. - 1/250
sec. to suit the scene’s brightness.
In low light, the main subject is exposed with the automatic
flash, and the background is exposed with a slow shutter speed
set automatically. Both the subject and background look
properly exposed (automatic slow-speed flash sync).
With slow shutter speeds, using a tripod is recommended.
If you do not want to use a slow shutter speed, set [
8
C.Fn I
-7
] (
Flash sync. speed in Av mode
) to [
1:1/250sec. (fixed)
].
(p.155)
a
:
You can set both the shutter speed (bulb or 30 sec. - 1/250
sec.) and aperture.
The flash exposure will be set automatically
to match the aperture that was set. The background exposure
will vary depending on the shutter speed and aperture.
8
: The flash result will be the same as the <
d
> mode.
Using the Built-in Flash
Using the Built-in Flash in the Basic Zone
Using the Built-in Flash in the Creative Zone
