Canon 1454B002 Quick Start Manual Download | Manualshive

Page: 60 / 116

background image

56

Routine Maintenance

When Printing Becomes Faint or Colors Are Incorrect

When printing becomes faint or colors are incorrect even if ink remains in the ink tanks, the print
head nozzles are probably clogged. Print the nozzle check pattern to confirm the condition of the
nozzles and then perform Print Head Cleaning.
If the ruled lines are shifted after running print head maintenance, align the Print Head.

z

If the Ruled Lines Are Shifted

Note

Before performing maintenance

z

Open the Scanning Unit (Printer Cover) and make sure that all lamps for the ink tanks are lit red.

– If any one of the lamps is flashing slowly, the associated ink tank is running low. You can continue

printing for a while, but we recommend you to have a replacement ink tank available.

– If any one of the lamps is flashing fast, the associated ink tank is empty. Replace the ink tank.

See “Replacing Ink Tanks” on page 52.

If an ink lamp is flashing fast even though ink remains in that ink tank, it is inserted in the wrong

position. Make sure that the ink tank of the correct color is inserted in each position, matching the

label. See “Replacing an Ink Tank” on page 50.

– If the ink lamp is not lit, the tank is not set properly. Press the

mark on the ink tank until the tank

clicks into place. Make sure that all packaging material is peeled off the ink tank. See “Prepare the

replacement tank.” on page 53.

z

Increase the

Print Quality

setting in the printer driver settings.

See “Print Results Not Satisfactory” on page 78.

Step 1

See “Printing the Nozzle Check Pattern” on page 57.

If lines are missing or if white streaks appear

After cleaning the

Print Head, print

and examine the

nozzle check

pattern.

Step 2

See “Print Head Cleaning” on page 60.

If the problem is not resolved after performing

Print Head Cleaning twice

Step 3

See “Print Head Deep Cleaning” on page 62.

Note

If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged. Contact your

Canon service representative.

Step 1

See “Aligning the Print Head” on page 64.

«
...
58
59
60
61
62
...
»

Summary of Contents for 1454B002





















































































































Reviews:

No comments

Related manuals for 1454B002

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 858

SCX-4300 - SCX 4300 B/W Laser

Brand: Samsung Pages: 97

SCX 4828FN - Laser Multi-Function Printer

Brand: Samsung Pages: 151

SCX 4725FN - B/W Laser - All-in-One

Brand: Samsung Pages: 120

SCX 4500 - B/W Laser - All-in-One

Brand: Samsung Pages: 97

SCX 4200 - B/W Laser - All-in-One

Brand: Samsung Pages: 95

SCX 4500 - B/W Laser - All-in-One

Brand: Samsung Pages: 172

ProXpress M337x

Brand: Samsung Pages: 56

PROXPRESS M332 SERIES

Brand: Samsung Pages: 50

ML-2240 - 23 Ppm Mono Laser Printer

Brand: Samsung Pages: 82

Brand: Samsung Pages: 8

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 134

ML-1610 - B/W Laser Printer

Brand: Samsung Pages: 112

Brand: Samsung Pages: 128

Brand: Samsung Pages: 152

ML 3471ND - B/W Laser Printer

Brand: Samsung Pages: 207

ML 2150 - B/W Laser Printer

Brand: Samsung Pages: 237

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands